[. . . ] Do not knock the self-cleaning coating or use metal brushes or blunt objects to clean it. [. . . ] Cooking foods which do not splatter can also be an opportunity to perform this regeneration. Do not cook food which could further stain the oven before the dirt from the previous cooking has been eliminated. If the appliance has the “Vapor Clean” function, do not point the spray nozzle towards the deflector. 1 Left self-cleaning panel 2 Self-cleaning deflector 3 Right self-cleaning panel The self-cleaning panels are coated in a special enamel which aids progressive elimination of grease splattering and odours caused by cooking food. 7 EN PC60 - PC68 - PC681 Installation of the self-cleaning panels 1. Remove the frames: pull the frame towards the inside of the oven to unhook it from its groove A, then slide it out of the seats at the back B. Set a regeneration cycle by selecting a fan assisted function at the maximum temperature for one hour. If the panels are particularly dirty after the regeneration cycle, remove them and wash them with neutral washing up liquid. Put the panels back in the oven and set a fan assisted function at a temperature of 180°C for one hour, in order to ensure that they are thoroughly dry. We recommend carrying out the self-cleaning panel regeneration cycle every 15 days. 7. [. . . ] • Spray a water and washing up liquid solution inside the oven using a spray nozzle. [. . . ]